SUP-DGJC117 is used to connect the distribution cable and the incoming cable, is widely applied in communication, network systems, CATV cable TV and so on.It adopts scientifically formulated engineering plastic and be shaped by injection molding, with anti-aging, anti-corrosion, flame retardant, waterproof, anti-vibration and anti-shock effects. plastic offers strength and resistance to chemical and U.V attack .Installation and reentry with a minimum of tools .This product Can effectively prevent the optic fibers from the influence of outdoor environment.Dome-to-base design; up to 10 pieces splice trays with excessive loose buffer storage basket, hinge for access of any splice without disturbing others trays; Fast and reliable sealing performance, easy to package multiple times. With lightning protection grounding device.

Application:Aerial, directly buried, Wall/ pole mounting

Duration: 25years Reuse: available

SUP-DGJC117	FT117-1	FT-117-2
Tray optinal y	Practical use without connector	sides splice

Features:

1.Excessive fibers can be stored in storage baskets. Easy in fiber management.

2.Fabricated by mixing the imported material and other chemical assistant agent (ageing resistance & ultraviolet radiation)increase of service life.

3.Base-to-dome seals on FOSC are mechanical and heat-shrinkable for ease of installation and reentry. No other sealing adhesive tape is needed.

4.Base and dome sealed with clamp and O-ring system.

5.The splice trays are hinged for access to any splice without disturbing others trays.

6.he inner parts and fixing parts are made of stainless steel.

7.FOSC with a earthing device protect it from damage by lightning.

8.Compatible with most cable types(single fiber or ribbon),and cable constructions (loose tube,central core,slotted core, modular). And the product can be used in any environment (aerial, buried,handhole,manhole)and in many applications (tap-off, expressed, branch,and repair) .

9.No special tools are needed to open the closure, and it can be opened and used repeatedly.

TechnicalParameter:

1. Working Temperature: -40 degrees centigrade~+65 degrees centigrade

2. Atmospheric Pressure: 62~106Kpa

3. Axial Tension: >1000N/1min

4. Flatten Resistance: 2000N/100 mm (1min)

5. Insulation resistance: >2*104MΩ

6. Voltage Strength: 15KV(DC)/1min, no arc over or breakdown

7. Temperature recycle: under -40℃~+65℃，with 60(+5)Kpa inner pressure, in 10cycles; Inner pressure shall decrease less than 5 Kpa when closure turn to normal temperature.

8. IP grade: 68